STANDARD MODERN 20" x 80" ENGINE LATHE

Description

Specification
Description
Swing Over Bed
22"
Swing Over Bed and Saddle Ways
20"
Swing Over Cross Slide
12"
Center Distance
80"
Main Drive Motor
15 HP
Bar Capacity
3"
Headstock:
Spindle Speeds (18)
27-1600 RPM
Spindle Nose - Camlock
D1-8"
Through Hole In Spindle
3.06"
Gear Box:
Feed and Thread Selections
66
Inch Feed Range
.0015 - .105 IPR
Inch Thread Range
2 to 127 TPI
Metric Feed Range
.04 to 2.67 MM/REV
Metric Lead Range
.2 to 14 MM
Apron:
Handwheel
One Revolution 1"
Half Nuts
Double
High Speed Treading to
800 RPM
Repeatability of Auto Carriage Stop
+.005"
Feed Torque Control
Variable
Carriage Cross Slide:
Carriage Length on Bed
21"
Carriage Bridge Width
10"
Cross Slide Length
24"
Cross Slide Tavel
12"
Compound Travel
5"
Direct Reading Dial Graduation
.001"
Tailstock:
Quill Diameter
2.94"
Quill Travel
8"
Morse Taper
#5 MT
Offset
+.75"
Bed and Base:
Bed Width
14"
Bed Depth
12-1/2"
Bed Length
124"
Base Length
134"
Base Width
30"
Dimensions (approx.)
11' LR x 4' FB x 4'8" H
Electrics
220 Volts, 3 PH, 60 CYC
Equipped With:
12" 3-Jaw Chuck,12" Face Plate, 10" Steady Rest, Live Center, Chip Pans, Inch/Metric Threading, Thread Dial
BUYER IS RESPONSIBLE FOR ALL LOADING AND SHIPPING CHARGES. CONTACT FOR DETAILS AND ASSISTANCE.
TERMS AND CONDITIONS FOR PURCHASING MACHINERY
Quotations and Acceptances:
For
immediate
acceptance,
subject
to
prior
sale
or
other disposition, and change without notice. Proposals
and acceptances of orders are made with the mutual
understanding
that
orders are
not
subject
to
cancellation.
Shipping
date
is
approximate
only,
and
contingent
upon delays or nonperformance occasioned by strikes, accidents,
fires
or
other
causes
beyond
our
control.
Prices:
Shipping
point
specified
and
subject
to
change
without notice.
Prices
are
exclusive
of
State,
County,
or
Federal taxes. Taxes are paid by Buyer in addition to quoted purchase
price.
Indemnification:
BUYER AGREES TO INDEMNIFY AND HOLD SELLER HARMLESS
FROM
ANY
AND
ALL
LIABILITY,
LOSS
OR
DAMAGES WHICH SELLER MAY SUFFER AS A RESULT OF CLAIMS, DEMANDS, COSTS, OR
JUDGMENTS, MADE AGAINST SELLER ARISING
OUT
OF ANY USE WHATSOEVER OF THE MACHINERY AND EQUIPMENT SOLD PURSUANT TO THIS
AGREEMENT
WHICH
LIABILITY,
LOSS
OR
DAMAGES,
CLAIMS, DEMANDS OR JUDGMENTS ARE BASED UPON OR RESULT FROM: (1) THE FAILURE OF BUYER, BUYER'S OFFICERS, AGENTS OR EMPLOYEES TO FOLLOW MANUFACTURER'S
INSTRUCTIONS,
WARNINGS
OR
RECOMMENDATIONS; OR (2) THE FAILURE OF BUYER, BUYER'S OFFICER'S, AGENTS OR EMPLOYEES TO COMPLY WITH THE FEDERAL, STATE OR LOCAL LAWS OR REGULATIONS
APPLICABLE TO THE USE OF SUCH
MACHINERY OR
EQUIPMENT, INCLUDING, BUT NOT LIMITED TO, 1970 OCCUPATIONAL SAFETY AND HEALTH ACT AS AMENDED; OR (3) ANY LIABILITY, LOSS OR DAMAGES, CLAIMS, DEMANDS, COSTS OR
JUDGMENTS BASED UPON OR RESULTING FROM ANY NEGLIGENCE OR ALLEGED NEGLIGENCE OF THE
SELLER
OFFICERS,
AGENTS
OR
EMPLOYEES
IN
THE SALE OF THE EQUIPMENT THAT IS THE SUBJECT
OF
THIS
AGREEMENT;
OR
(4)
LIABILITY,
LOSS
OR
DAMAGES,
CLAIMS,
DEMANDS,
COSTS
OR JUDGMENTS BASED UPON OR RESULTING
FROM
ANY LEGAL THEORY OF STRICT LIABILITY OR LIABILITY WITHOUT FAULT APPLIED TO BUYER OR TO SELLER OR TO THE ORIGINAL MANUFACTURER OF THE SUBJECT MACHINERY OR EQUIPMENT TO SELLER; OR (5) LIABILITY, LOSS OR DAMAGES, CLAIMS, DEMANDS, COSTS OR
JUDGMENTS BASED UPON OR RESULTING FROM ANY THEORY OF BREACH OF WARRANTY OF ANY
KIND.
Terms:
Payment in full before shipment, unless otherwise arranged.
It
is
understood
there
are
no
conditions
or
agreements
pertaining to
the
equipment
herein
other than
as
set
forth
in this written proposal, and all prior conversations,
agreements, or representations are superseded. Seller
reserves the right to correct typographical errors. Specifications are included merely as a guide and
not binding in
detail.
There are no warranties expressed or implied, including warranties of merchant ability and fitness for purpose made by seller in connection with this sale except as expressly set forth  herein.  Seller will accept within thirty days from shipment any used machinery and equipment sold with a return privilege freight prepaid, for refund of the purchase price if proven mechanically unsatisfactory, or repair at dealer's option. This return privilege does not apply where we act as broker or to machines sold "as is" or "as inspected" unless otherwise noted so stated. We are not responsible for electrical changeovers.
Buyer
in
purchasing
equipment
agrees
upon
receipt
of machinery
subject
to
this
agreement.
It
will
be
Buyer's Duty to inspect all Machinery On A Continuing Basis; Provide Proper Safety Devices and Equipment or Means Necessary to Safeguard the Operator from Harm for any
particular
use;
Operation
or
Set-up
of
Machines;
to Adequately safeguard each machine or equipment to meet all government safety standards which may be imposed
from
time
to
time.
Including,
but
not
limited
to, 1980 Occupational Safety and Health
Act.