NEW SHARP 1340VS 13 X 40 Digital Variable Speed Precision Lathe

Description

BRAND NEW
Sharp Model 1340VS Precision Lathe with Digital Variable Speed Control. Shipped direct from Sharp in Torrance, CA.
ORDERS? QUESTIONS? CALL US 866-532-2962
Sharp is constantly looking for new technology and design to enhance the quality and features of its products. The Model 1340VS is one example. Built from the design of our long time successful model 1340F, the model 1340VS is equipped with variable speed inverter drive and digital display of spindle speeds. Now, the change of speed is simply the turning of a dial, and the number of speeds is infinitely variable. To maintain high torque at lower speed rangs, the headstock is equipped with 2-step gear change lever. The front panel of the headstock has a jog button for easy arrangement of gears. Another new function is the push-pull knob monted at the front of the apron. This knob controls the feed direction of the carriage, it greatly enchances the ease of operation of the machine. The spindle is made out of forged steel, induction hardened and precision ground for high accuracy and durability. It is mounted on 2 high precision tapered roller bearings offering maximum stability even at 2,000 RPM. The machine can run on single phase or 3 phase electricity because of its inverter drive.
SPECIFICATIONS
MODEL
1340VS
CAPACITY
Swing over bed
13"
Swing over cross slide
8 5/16"
Swing over gap
18 1/2"
Width of bed
7 1/2"
Distance between centers
40"
HEADSTOCK
Spindle nose type
D1-4 camlock
Spindle bore
1-9/16"
Spindle speeds
40 - 2,000 rpm [16]
Taper of spindle bore
MT #5
THREADS AND FEEDS
longitudinal feeds - in / rev [40]
0.0016 - 0.046"
Cross feed - in / [40]
0.0005 - 0.015"
inch threads [39)
2-56 (39)
Metric threads [42)
0.5 to 12 (42)
leadscrew pitch, diameter
8 tpi, 1"
CARRIAGE
Saddle width
12"
Apron width
11"
Cross slide width
4.5"
Cross slide travel
6 3/4"
compound rest travel
3 1/2"
compound width x length
3 x 7 1/2"
BED
Bed length
64"
Bed width
7 1/2"
TAILSTOCK
Quill travel (graduated)
4"
Quill diameter
1 9/16"
Quill taper
MT #3
GENERAL
Spindle motor (220V or 440V, 60Hz, 3 phase or single phase electrics
3 hp
Net weight (approx.)
1,550 LBS
FEATURES
Variable speed spindle drive with digital display
Hi-low gear shift for spindle speed, range from 40-2,000 RPM
Hardened & ground gears in headstock
Directional control of carriage feed in front of apron for easy operation
Jog button for easy engagement of gears
Induction hardened & ground bedways for rigid structure
Spindle supported by 2 high precision tapered roller bearings
Carriage equipped with overload clutch to protect gears & screws
Available for 3 phase or single phase electrics
Electrically activated foot brake for quick stopping action
Built-in cabinet for tools storage
STANDARD EQUIPMENT
Coolant system
Splash guard
4 way toolpost
6" diameter back plate
Thread dial
Foot brake
Center sleeve MT #5 x #3
Dead centers MT #3
Tool kit
8" 3 jaw chuck
Optional accessories
Face plate (12")
Follow rest
Single toolpost
Micrometer carriage stop
Taper attachment
Live center (MT #3)
Drill chuck
Digital readout system
WARRANTY
1 Year Parts Manufacturer's Warranty
Please note this item ships direct from the manufacturer. Lead time may exist. Please call us before ordering to check stock.
We are an authorized distributor for Sharp products. Please Email me [email protected] or call me with any questions.
Best regards,
Tom Moore
Moore Tool & Equipment
X